Kyocera Mita DC-1560, Service Manual

Page: 100 / 289

3-1-1
1AF
a: 1130 mm/44
1
/
8
"
b: 595 mm/23
7
/
16
"
c: 485 mm/19
1
/
8
"
d: 338 mm/13
5
/
16
"
e: 980 mm/38
9
/
16
"
f: 590 mm/23
1
/
4
"
g: 894 mm/35
3
/
16
"
3-1-1 Unpacking and installation
(1) Installation environment
1. Temperature: 10 – 35°C/50 – 95°F
2. Humidity: 15 – 85%RH
3. Power supply: 220 – 240 V AC, 6.3 A
4. Power source frequency: 50/60 Hz ± 0.3%
5. Installation location
• Avoid direct sunlight or bright lighting. Make sure that the photoconductor will not be
exposed to direct sunlight or other strong light when removing paper jams.
• Avoid extremes of temperature and humidity, abrupt ambient temperature changes,
and hot or cold air directly hitting the machine.
• Avoid dust and vibration.
• Choose a surface capable of supporting the weight of the machine.
• Place the machine on a level surface (maximum allowable inclination: 1°).
• Avoid air-borne substances that may adversely affect the machine or degrade the
photoconductor, such as mercury, acidic and alkaline vapors, inorganic gases, NO
x
,
SO
x
gases and chlorine-based organic solvents.
• Select a room with good ventilation.
6. Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 1000 mm/39
3
/
8
" Machine rear: 100 mm/4"
Machine right: 700 mm/27
5
/
8
" Machine left: 600 mm/23
5
/
8
"
Figure 3-1-1 Installation dimensions
a
e
f
g
b
c
d