Kongsberg Simrad ST90, Reference Manual

Page: 243 / 690

442704/A
241
b Type or copy the IP address into the relevant box.
c Type or copy the MAC address into the relevant box.
d Select
ADD Sonar PC
.
e Observe that your Processor Unit is added to the list.
f Close the web browser.
5 Make sure that the Operating Panel is functional.
a Make sure that the blue indicator is lit, and check that you can move the cursor
on the screen.
b On the Processor Unit desktop, double-click the ST90 icon to start the program.
Wait until the ST90 system operates normally.
c Press and hold
Power
depressed four minimum four seconds to turn off the
Operating Panel.
Observe that the
Transceiver On/Off
dialog box opens automatically.
Make sure that the ST90 system is turned off.
d Turn on the ST90 system with the
Power
button on the Operating Panel.
e Make sure that you can control the cursor, and that you can make selections in
the menu system.
f Press and/or turn selected buttons, and make sure that the corresponding function
is activated in the user interface.
Related topics
Maintenance procedures, page 186
Installing and maintaining software, page 230
Using more than one Operating Panel to control the sonar
(Mk2)
A secondary Operating Panel may be connected to the Processor Unit. This may be useful
in conjunction with a second display if you wish to control the ST90 system from two
different locations on your vessel.
Prerequisites
The Operating Panel is installed as specified in the Installation manual . The Processor Unit
is turned on. The following specific items are required for this task:
• Computer mouse
• Computer keyboard
Maintenance procedures