Kongsberg Simrad ST90, Reference Manual

Page: 72 / 690

70
442704/A
Turning off the ST90 system
When you do not use the ST90 system, turn it off. Select
Power Off
on the top bar to turn
off the ST90 system. You can also use the
Power
button on the Operating Panel. You must
never turn off the ST90 system by means of the on/off switch on the Processor Unit.
Procedure
1 Select
Power Off
on the top bar.
In the
Power Off
dialog box, select
Power off
or
Exit to Operating System
.
•
Power Off
turns off the Processor Unit and the Transceiver Unit.
•
Exit to Operation System
closes the ST90 program.
• Both functions will also retract the transducer.
or:
2 On the Operating Panel, press
Power
, and keep it depressed for a few seconds.
In the
Power Off
dialog box, select
Power off
or
Exit to Operating System
.
3 Wait while the ST90 program closes and the Transceiver Unit is turned
off.
4 Turn off the display.
If required, refer to the instructions provided by the display manufacturer.
Related topics
Getting started, page 34
Starting normal operation, page 52
Turning on the ST90 system for normal use, page 52
Simrad ST90 Reference Manual