Kongsberg Simrad ST90, Reference Manual

Page: 240 / 690

238
442704/A
If necessary, select the license string on the left side, and click the arrow button [ > ] to
move it to the
Currently active licenses
list.
9 Select
Apply
and then
Close
to save all the parameters and close the
Installation
dialog
box.
Related topics
Maintenance procedures, page 186
Installing and maintaining software, page 230
Software License page, page 606
Setting up the Operating Panel (Mk2)
The Operating Panel offers all necessary control functions for normal operation. Before
it can be put to use, the Mk2 Operating Panel must be configured to permit Ethernet
communication between the panel and the Processor Unit.
Prerequisites
The Operating Panel is installed as specified in the Installation manual . The Processor Unit
is turned on. The following specific items are required for this task:
• Computer mouse
• Computer keyboard
Neither tools nor instruments are required.
Context
When supplied, the Operating Panel is set up with the following communication parameters:
• IP Address: 157.237.60.20
• Subnet mask: 255.255.255.0
• Gateway: 157.237.60.1
To set up the Ethernet communication, you must define the IP address for the panel, and
identify the Processor Unit in the panel software. These settings allow you to use more than
one Operating Panel on the Processor Unit. You can also control more than one Processor
Unit from a single Operating Panel.
The IP and MAC addresses for your Processor Unit are contained in a text file named
IPandMACaddress.txt
. The file contains the product name, IP address and MAC address in
the following format (example):
Simrad ST90 Reference Manual