Kongsberg Simrad ST90 Reference Manual Download

Page: 232 / 690

230

442704/A

Installing and maintaining software

Topics

Installing a new version of the operating software, page 230

Removing the operating software, page 232

Updating the online help system, page 233

Adding online help in a new language, page 234

Obtaining and installing a software license for additional functionality, page 236

Setting up the Operating Panel (Mk2), page 238

Using more than one Operating Panel to control the sonar (Mk2), page 241

Using a single Operating Panel to control more than one sonar (Mk2), page 245

Updating the Operating Panel support applications (Mk2), page 249

Updating the firmware on the Operating Panel (Mk2), page 251

Installing a new version of the operating software

A dedicated wizard is used to install the software. The operating software for the ST90
system must be downloaded on a separate computer.

Prerequisites

The following specific items are required for this task:

• Personal computer

• USB flash drive

• Computer mouse (Optional)

• Computer keyboard (Optional)

Neither tools nor instruments are required. This procedure is made for the Microsoft

Windows

10 operating system. It is assumed that you are familiar with this operating

system.

Note

The software release note may contain additional details related to the software installation.

Simrad ST90 Reference Manual

Summary of Contents for Simrad ST90



















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Simrad ST90

Reviews:

Related manuals for Simrad ST90

Brands by name

Popular brands

Kongsberg Simrad ST90, Reference Manual

Search results

Summary of Contents for Simrad ST90

Reviews:

Related manuals for Simrad ST90

Brands by name

Popular brands