Kongsberg Simrad ST90, Reference Manual

Page: 143 / 690

442704/A
141
Note
Operating Panel (Mk1): Press
Record
to make a screen capture.
Procedure
1 Open the
Setup
menu.
2 Select
Screen Captures
.
3 Select screen capture mode.
In Single mode one screen capture is taken every time you select
Screen Capture
on
the top bar.
In Sequence mode a new screen capture is created for every ping.
4 Select
Close
to save the chosen settings and close the dialog box.
Related topics
Operating procedures, page 79
Capturing the display presentation in image and video files, page 138
Capturing the display presentation in an image, page 138
Capturing the display presentation using one image for each ping, page 139
Choosing screen capture mode, page 140
Accessing the screen capture images to delete, move or copy them, page 141
Screen Captures dialog box, page 459
Accessing the screen capture images to delete, move or copy
them
When the screen capture images have been saved, you may wish to delete them, copy them,
or move them to a separate storage device.
Prerequisites
It is assumed that you are familiar with the Microsoft ® operating system utilities for file
handling.
You need a data storage device. This is typically a large capacity USB flash drive or a
small portable hard disk. You can also connect the computer to a network, and copy the
files to a server.
Operating procedures