Kongsberg Simrad ST90, Reference Manual

Page: 130 / 690

128
442704/A
Note
The data files will normally become very large. If you wish to record large amounts of
data, make sure that you have enough space on your hard disk. The ST90 system is not
provided with unlimited disk capacity. We recommend that you save the data files to an
external storage device.
Procedure
1 Open the
Operation
menu.
2 Start data recording by opening the
Record RAW
button, and select On .
or:
To start recording, select the red circle on the right side of the button.
The
Record
indicator on the top bar changes its colour to reflect that recording is active.
3 To stop recording, select Off or the black rectangle on the right side of the
Record
RAW
button.
Related topics
Operating procedures, page 79
Recording and replaying echo data, page 126
Defining the file and folder settings for data recording, page 126
Record RAW function, page 434
Accessing the echo data files to delete, move or copy them
Use the data recording functionality provided by the ST90 system to save echo data. You
can save the data to the hard disk, or onto an external storage device.
Prerequisites
It is assumed that you are familiar with the Microsoft ® operating system utilities for file
handling.
You need a data storage device. This is typically a large capacity USB flash drive or a
small portable hard disk. You can also connect the Processor Unit to a network, and copy
the files to a server.
Procedure
1 Connect a suitable storage device to the Processor Unit.
Simrad ST90 Reference Manual