Kongsberg Simrad ST90, Reference Manual

Page: 373 / 690

442704/A
371
Zoom information pane
The Zoom information pane allows you to magnify a chosen area of the current Inspection
view.
How to open
Before you open an information pane, you must first click in an Inspection view to make it
"active". The information provided will only be valid for the selected view.
To open the Zoom information pane, click in the chosen view to activate it, then select
Zoom
on the top bar. To open the second and third Zoom information panes, simply select the
Zoom
button repeatedly. To close the information pane, select it one more time on the top
bar. You can also select
Close
in the top right corner of the pane.
Note
Information panes are only available for Inspection views.
Description
Once the Zoom information pane is opened, the zoomed area is shown as a dotted rectangle
in the view. You can change the size of the zoomed area, and you can move the rectangle
anywhere inside the active view.
• Click inside the rectangle, hold the mouse button depressed, and move the rectangle
within the borders of the view.
• Click any of the four corners, hold the mouse button depressed, and drag the rectangle to
any other size and shape.
The echoes inside the zoomed area will always be shown in the Zoom information pane.
Use
Area Pinned To Vessel
to control the behaviour of the zoom function.
Each Zoom information pane export information. When opening the Biomass and/or the Size
Distribution information panes, you will automatically receive information from each of the
Zoom information panes that you have opened.
You can easily change the physical size and shape of each information pane. Click in its
lower right corner, and drag to a new size.
To reset the information pane to its default size, select the
Reset size
button in its top right
corner.
User interface