Kongsberg Simrad ST90, Reference Manual

Page: 71 / 690

442704/A
69
Procedure
1 Click in the view you want to activate.
The active view is identified with a thicker border. Unless you use the
Apply to all
function, all changes you make will only be applied to this view.
2 Use the joystick to make the adjustment.
Tip
Optionally: Turn the relevant rotary switch to make the adjustment.
The Mk2 Operating Panel is fitted with three rotary switches. The switches are
identified with numbers. Each switch can be assigned a function related to range, gain,
bearing or tilt. Investigate the functionality provided on the
Operating Panel
page. This
page is located in the
Installation
dialog box.
Optionally:
3 In a Horizontal view, select the bearing line and drag it sideways.
Optionally:
4 Observe the
Main
menu.
Its default location is on the right side of the display presentation.
5 Select
Bearing
.
6 Make the necessary adjustment.
The following methods can be used to adjust this setting:
a Select [ + ] or [ - ] to choose the requested setting.
b Place the cursor on the button. Press and hold the left mouse button. Move the
cursor horizontally over the button. Release the mouse button when requested
value is shown.
c Select the middle of the button to open it. If you have a keyboard connected to the
ST90 system, type the requested value.
7 Open the button and select
Apply to all
if you wish to use the chosen setting in all the
views in the current presentation mode.
Related topics
Getting started, page 34
Starting normal operation, page 52
Bearing function, page 426
Getting started