Kongsberg Simrad ST90, Reference Manual

Page: 136 / 690

134
442704/A
2 Select
Output
.
Observe that the
Output
dialog box opens. This dialog box contains a number of pages
selected from the menu on the left side.
3 Select
Processed Data to File
to open the page.
a Select an output type from the list.
b Define the output directory for the recorded files.
c Select
Add
to save the output format.
d Select
Apply
to save your choices.
4 At the bottom of the
Output
dialog box, select
OK
to save the chosen parameters and
close it.
Related topics
Recording and exporting processed echo data, page 133
Operating procedures, page 79
Processed Data to File page, page 520
Recording processed data
The
Record Processed
function provided by the ST90 system allows you to save processed
data on a selected format. The data files can be copied or moved to an external storage
device, or to another computer on the network. You can keep the recorded files for scientific
studies, future references or for training purposes. The recording is controlled by the
Record
Processed
function.
Prerequisites
Before you start data recording, make sure that you have defined where to store the files. To
define which disks and folders to use to save the data files, use the
File Setup
page. The
File
Setup
page is located in the
Output
dialog box. If you wish to save your recorded data on an
external hard disk, make sure that it is connected to the computer.
Before you start recording, you must also define which output format(s) you wish to use. To
choose which processed data formats to record, select
Processed Data to File
.
Context
You can save and recall echo information using the following methods and formats:
• Use
Record
on the
Operation
menu to record raw data. To play back data, select
Operation
and then Replay mode. The Replay mode allows you to play back previously recorded
Simrad ST90 Reference Manual