Kongsberg Simrad ST90, Reference Manual

Page: 58 / 690

56
442704/A
2 Observe the information pane "buttons" on the top bar.
The ST90 system offers several information panes to provide additional and detailed
data from the presentations. Each information pane is opened and closed from the
top bar.
Note
Information panes are only available for Inspection views. Before you open an
information pane, you must first click in an Inspection view to make it "active".
3 Move the cursor to the menu system on the right side of the presentation.
The
Main
menu is located at the top of the menu structure. It offers the most common
functions for efficient use of the ST90 system. Below the
Main
menu, a set of dedicated
icons are used to open the secondary menus. Select the icon one more time to close
the menu.
4 Move the cursor to the bottom of the display presentation.
The bottom bar is located at the bottom of the display presentation and stretches
from the left side to the right side. It allows you to choose presentation mode (view
combinations). It also shows you the colour scale you are using, as well as current time
and date. You can further monitor the operational status of the transceiver.
5 Move the cursor to the views in the main part of display presentation.
The various presentation modes selected on the bottom bar gives you different view
configurations. By default, the views are arranged automatically in the presentation.
You can change the physical size of any view. Click on the view border, hold the button
depressed, then drag the border to create a smaller or larger rectangle. Note that the
size of the other views are changed accordingly!
6 Click inside one of the views.
Before you can change the settings related to a view, you must click inside the view
to activate it. The changes you make are by default only valid for the active view.
Observe that the border lines of the active view are drawn with a thicker line.
Several of the functions offer
Apply to All
. If you select
Apply to All
your setting is
applied to all the views in the current presentation mode.
Related topics
Getting started, page 34
Starting normal operation, page 52
Sonar views, page 326
Presentation modes, page 327
Simrad ST90 Reference Manual