Kongsberg Simrad ST90, Reference Manual

Page: 245 / 690

442704/A
243
f Do not connect the Operating Panel to the Ethernet switch.
Ethernet cables
Tip
An Ethernet switch connected to ETH1 on the rear side of the Processor Unit can also be
used to interface other peripheral systems such as echo sounders and positioning systems.
You can also connect the Olex system to the ST90 system using this Ethernet switch.
2 Change the IP Address on the primary Operating Panel.
Note
Each Operating Panel must have a different IP Address. None of the panels must use
the default IP Address. If you have previously changed the IP Address on the Operating
Panel, you can proceed to the next step.
a On the Operating Panel, press
Power
, and keep it depressed for a few seconds.
The blue indicator light in the button flashes while the Operating Panel establishes
contact with the Processor Unit. When the connection has been made, the blue
indicator light is lit permanently.
b On the Processor Unit desktop, open folder
SIMRAD-Shortcut
.
c Double-click the URL shortcut to open the Operating Panel configuration page in
the default web browser.
d Select
SOP Configuration
on the top menu to open the page.
e In the
SOP IP
field, change the IP Address from the default value to:
157.237.60.xx
The last digit "xx" in the IP Address can be any number between 21 and 29.
Maintenance procedures