Kongsberg Simrad ST90, Reference Manual, Page: 137 / 690

442704/A
135
data. In Replay mode the ST90 system is not able to transmit ("ping"). For this reason,
the ST90 system is inactive during playback.
• Use
Record Processed
on the
Operation
menu to record processed data. This is only an
export format. Processed data files can not be played back on the ST90 system.
Note
The data files will normally become very large. If you wish to record large amounts of data,
make sure that you have enough space on your hard disk. Unless your computer is equipped
with a very large disk, we recommend that you save the data to an external storage device.
Procedure
1 Make sure that the
Record Processed
function is available.
If the
Record Processed
function is unavailable, it is most likely because you have
forgotten to specify an output format. Use
Processed Data to File
to define which
processed data formats to save, and where to place the files. This page is located in
the
Output
dialog box.
2 To start data recording, open the
Record Processed
button, and select On .
Alternatively, simply select the red circle on the right side of the button.
3 To stop recording, open the
Record Processed
button, and select Off .
Alternatively, select the black rectangle on the left side of the button to stop the
recording.
Related topics
Recording and exporting processed echo data, page 133
Operating procedures, page 79
Record Processed function, page 436
Operating procedures