Kongsberg Simrad ST90, Reference Manual

Page: 76 / 690

74
442704/A
Related topics
Getting started, page 34
Basic operating procedures, page 71
Saving single or sequential screen captures
While using the ST90 system you may wish to make a screen capture to save an
instantaneous copy of the current presentation. Each screen capture you make is saved in
.jpg
format on the Processor Unit hard disk.
Context
You can choose either a single screen capture or a sequence with multiple screen captures.
Each screen capture you make is saved in
.jpg
format on the Processor Unit hard disk. The
file name reflects the current date and time.
Screen Capture
on the top bar allows you to make a copy of the current display presentation.
You can also use the
Screen Capture
button on the Operating Panel.
Procedure
Choosing screen capture mode:
1 Open the
Setup
menu.
2 Select
Screen Captures
.
a Select screen capture mode.
• Single: In Single mode one screen capture is taken every time you select
Screen
Capture
on the top bar.
• Sequence: In Sequence mode a new screen capture is created for every ping.
b Select
Close
to save the chosen settings and close the dialog box.
Saving a single screen capture:
3 Observe
Screen Capture
on the top bar.
4 Select
Screen Capture
to make a copy of the entire display presentation.
Every time you do this a new image file is created.
You can also use the
Screen Capture
button on the Operating Panel.
Simrad ST90 Reference Manual