Kongsberg Simrad ST90, Reference Manual

Page: 140 / 690

138
442704/A
Capturing the display presentation in image
and video files
Topics
Capturing the display presentation in an image, page 138
Capturing the display presentation using one image for each ping, page 139
Choosing screen capture mode, page 140
Accessing the screen capture images to delete, move or copy them, page 141
Capturing the display presentation in a video file, page 142
Selecting where to save the video files, page 143
Capturing the display presentation in an image
While using the ST90 system you may wish to make a screen capture to save an
instantaneous copy of the current presentation.
Context
You can choose either a single screen capture or a sequence with multiple screen captures.
Each screen capture you make is saved in
.jpg
format on the Processor Unit hard disk. The
file name reflects the current date and time.
Procedure
1 Make sure that the screen capture mode is set to Single .
You can choose either a single screen capture or a sequence with multiple screen
captures. Open the
Screen Captures
dialog box to select screen capture mode.
2 Observe
Screen Capture
on the top bar.
3 Select
Screen Capture
to make a copy of the entire display presentation.
Every time you do this a new image file is created. Each capture includes
the entire display presentation. This includes all the current views as well as
the menu system.
You can also use the
Screen Capture
button on the Operating Panel.
Simrad ST90 Reference Manual