22
SYSTem Subsystem
534
Keysight 8990B Programming Guide
–
141
Invalid character data
Either the character data element contains an invalid character, or the element is not valid
–
144
Character data too long
The character data element contains more than 12 characters
–
148
Character data not allowed
A discrete parameter was received but a character string or a numeric parameter was expected. Check the
list of parameters to verify that you have used a valid parameter type.
Example: MARK:MODE OFF_0
–
150
String data error
Generic string data error
–
151
Invalid string data
An invalid string was received. Check to see if you have enclosed the character string in single or double
quotes.
Example; SYST:COMM:LAN:ADDR “10.0.0.2
–
158
String data not allowed
A character string was received but is not allowed for the command. Check the list of parameters to verify
that you have used a valid parameter type.
Example: SYST:LOCK 'ON'
–
160
Block data error
Generic block data error
–
161
Invalid block data
A block data element was expected but was invalid for some reason
–
168
Block data not allowed
A legal block data element was encountered but not allowed by the 8990B at this point
–
170
Expression error
Generic expression error
–
171
Invalid expression data
The expression data element was invalid
–
178
Expression data not allowed
A legal expression data was encountered but not allowed by the 8990B at this point
Example: MARK:LEV (5+5)
–
200
Execution error
Generic syntax error
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...