SYSTem Subsystem
22
Keysight 8990B Programming Guide
541
SYSTem:HELP:HEADers?
This query returns the SCPI commands available on the 8990B in the IEEE block
format. Each command returned is separated by a new-line character (
0x0A
). At
the end of each command before the new-line character, the following string
characters may be present:
–
/nquery/
— for the SCPI command only
–
/qonly/
— for the SCPI query only
–
<empty>
— for both the SCPI command and the query
An example of the return data is as follows:
#41024«x0A»:AUToscale/nquery/«x0A»:AVERage …
Syntax
Example
Remark
The output representation of the IEEE block format may vary depending on the
device and software used.
SYST
:HELP
?
:HEAD
SYST:HELP:HEAD?
Queries the SCPI commands available on the 8990B.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...