TRIGger Subsystem
8
Keysight 8990B Programming Guide
199
TRIGger:EDGE:SLOPe <character_data>
This command sets the slope type for the edge trigger.
Syntax
Parameter
Example
Reset condition
On reset, the edge trigger slope is set to positive.
TRIG
:EDGE
Space
?
:SLOP
character_data
Item
Description/Default
Range of values
character_data
Sets the edge trigger slope type as:
–
POSitive
: Sets the slope to positive. This is the default
setting.
–
NEGative
: Sets the slope to negative.
POSitive
NEGative
TRIG:EDGE:SLOP POS
This command sets the slope to positive for the
edge trigger.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...