Keysight 8990B Peak Power Analyzer
Programming Guide
295
11
MARKer Subsystem
MARKer:ASLope <character_data>
MARKer:AXPosition <numeric_value>
MARKer:AYPosition <numeric_value>
MARKer:BSLope <character_data>
MARKer:BXPosition <numeric_value>
MARKer:BYPosition <numeric_value>
MARKer:ASOUrce <character_data>
MARKer:BSOUrce <character_data>
MARKer:AYSEARCH <numeric_value>
MARKer:BYSEARCH <numeric_value>
MARKer:SPACing:PULSe{1|2} <numeric_value>
MARKer:SPACing:SOURce <character_data>
This chapter describes how the
MARKer
command subsystem is used to configure
the marker setup for the trace.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...