11
MARKer Subsystem
322
Keysight 8990B Programming Guide
Example
Reset condition
On reset, the marker measurement mode is set to
OFF
.
Query
MARKer:MODE?
This query returns the current setting of the marker measurement mode.
Query example
Remarks
– When the marker measurement mode is set to
WAVeforms
in CCDF mode,
error -221, "Settings conflict; Track Measurement is not allowed in CCDF
mode." will occur.
– To enable the tracking of waveform measurements using markers, refer to
“MEASure:TRACKMEAS <character_data>, CHAN{1|2|3|4},[NORMal|ZOOM],
MARK:MODE WAV
This command sets the marker measurement mode to
waveform tracking using markers.
MARK:MODE?
Queries the marker measurement mode setting.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...