DISK Subsystem
18
Keysight 8990B Programming Guide
473
Example
Remarks
– The instrument setup data is recalled from a file with a .xml extension.
– The waveform data and CCDF memory data is recalled from a file with a .csv
extension.
– If an invalid file name is specified, error –256,“File name not found” will occur.
This error may also occur due to missing directory. Ensure that the directory
exists.
– If the “PPA.xml” file is corrupted, the following error — “Application: Corrupted
system setup file detected while restoring system setup. PPA restoring all
configurations to default value.” — will occur.
– No character data is required when loading CCDF waveform. For example, THE
DISK:LOAD “c:\wfmCCDF1.csv” command loads the saved waveform into
CCDF.
DISK:LOAD
“c:\wave\wfm1.csv”,WMEM1
This command loads the saved
waveform into memory slot 1.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...