DISPlay Subsystem
16
Keysight 8990B Programming Guide
457
DISPlay:CLEar [<character_data>]
This command clears the current screen display of the 8990B.
Syntax
Parameter
Example
Remarks
– When the 8990B is running in the continuous acquisition mode, this command
clears the current waveform and redraws it.
– This command also clears the measurement data, marker information, droop
measurement data, and waveform averaging if the
MEASuretab
parameter is
not specified.
Reset condition
On reset, the clear display function is set to
SCReen
.
:CLE
Space
character_data
DISP
Item
Description/Default
Range of values
character_data
This is an optional parameter where it sets the clear display
function as:
–
SCReen
: Clears and resets the current screen display. This is the
default setting.
–
ALL
: Clears the current screen and measurement data display.
–
MEASuretab
: Clears the measurement data only.
SCReen
ALL
MEASuretab
DISP:CLE
This command clears the current screen display.
Summary of Contents for 8990B
Page 1: ...Keysight 8990B Peak Power Analyzer Programming Guide ...
Page 16: ...16 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 18: ...18 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Page 20: ...20 Keysight 8990B Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...