18-2
dummyhead
dummyhead
LIGHTS/METER/SWITCHES
LIGHTS/METER/SWITCHES
COMPONENT LOCATION
SERVICE INFORMATION
GENERAL
• A halogen headlight bulb becomes very hot while the headlight is "ON", and remains hot for a while after it is turned "OFF".
Be sure to let it cool down before servicing.
• Keep all flammable materials away from the electric heating element. Wear protective clothing, insulated gloves and eye
protection.
• Note the following when replacing the halogen headlight bulb.
– Wear clean gloves while replacing the bulb. Do not put finger prints on the headlight bulb, as they may create hot spots on the
bulb and cause is to fail.
– If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
– Be sure to install the dust cover after replacing the bulb.
• Check the battery condition before performing any inspection that requires proper battery voltage.
• A continuity test can be made with the switches installed on the motorcycle.
TURN SIGNAL
RELAY
CLUTCH SWITCH
IGNITION SWITCH
STARTER SWITCH
FRONT BRAKE LIGHT SWITCH
LEFT HANDLEBAR
SWITCH
HORN
NEUTRAL SWITCH
SIDESTAND SWITCH
(NZ TYPE)
REAR BRAKE
LIGHT SWITCH
Summary of Contents for XL125LK
