12-7
dummyhead
dummyhead
CRANKSHAFT/TRANSMISSION/KICKSTARTER
When installing the
retainer plate, pull
the crankshaft [3]
and hook the plate
tab to the
crankshaft bearing
groove as shown.
Install the bearing retainer plates [1] and bolts [2].
Tighten the bolts securely.
Apply molybdenum oil solution to the push plug entire
surface.
Install the push plug [1] and spring [2] by aligning the
tapered surfaces of the plug and crankshaft bearing
outer race [3].
Apply locking agent to the push plug plate bolt threads.
Install the push plug plate [1] and bolt [2], and then
tighten the bolt to the specified torque.
Install the cam chain [1] and cam chain guide [2].
Install the setting plate [3] with the two bolts [4] and
tighten the bolts.
Install the following:
– Neutral switch (page 18-9)
– Starter motor (page 5-6)
– Flywheel (page 11-5)
– Gearshift linkage (page 10-12)
– Primary drive gear (page 10-13)
– Kickstarter (page 12-15)
– Clutch (page 10-8)
– Oil pump (page 7-3)
– Cylinder and piston (page 9-5)
– Cylinder head (page 8-11)
– Engine (page 13-5)
[1]
Hook
[1]
[2]
[3]
[1]
[2]
[3]
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
[1]
[2]
[4]
[3]
[2]
[1]
Summary of Contents for XL125LK
