Honda XL125LK, Owner'S Manual

Page: 45 / 243

3-4
dummyhead dummyhead
MAINTENANCE
AIR CLEANER
• The viscous paper element cannot be cleaned
because the element contains a dust adhesive.
• If the motorcycle is used in unusually wet or dusty
areas, more frequent inspections are required.
Remove the following:
– Side covers (page 2-2)
– Seat (page 2-2)
Remove the screws [1] and air cleaner case cover [2].
Remove the air cleaner element screws [1].
Replace the element [2] in accordance with the
maintenance schedule or anytime it is excessively dirty
or damaged.
Install the removed parts in the reverse order of
removal.
AIR CLEANER SUB FILTER (XR125LK/
LEK)
Remove the following:
– Side shroud (page 2-4)
– Fuel tank (page 2-4)
Check the air cleaner sub filter [1] and replace if
necessary.
When replacing the sub filter, remove the following.
Disconnect the air cleaner sub filter-to-PAIR control
valve hose [2].
Disconnect the air cleaner sub filter-to-three way joint
hose [3] and remove the air cleaner sub filter.
Installation is in the reverse order of removal.
[1] [2]
Check that the
packings in good
condition, replace
them if necessary.
TORQUE:
Air cleaner element screw:
1.1 N·m (0.1 kgf·m, 0.8 lbf·ft)
Air cleaner case cover screw:
1.1 N·m (0.1 kgf·m, 0.8 lbf·ft)
[2]
[1]
Install the air filter,
turning its arrow
mark [4] in the
direction as shown
in the illustration.
[4]
[3] [1] [2]