Honda XL125LK, Owner'S Manual

Page: 52 / 243

3-11
dummyhead dummyhead
MAINTENANCE
SPROCKET INSPECTION
Remove the drive sprocket cover (page 2-5).
Inspect the drive and driven sprocket teeth for wear [1]
or damage [2], replace if necessary.
Never use a new drive chain on worn sprockets.
Both chain and sprockets must be in good condition [3],
or new replacement chain will wear rapidly.
Check the attaching bolts and nuts on the drive and
driven sprockets.
If any are loosen, torque them.
Install the drive sprocket cover (page 2-5).
DRIVE CHAIN SLIDER
Remove the drive sprocket cover (page 2-5).
Check the drive chain slider [1] for wear or damage.
Replace the drive chain slider if it is worn up to the wear
limit.
Refer to procedure for swingarm removal/installation
(page 15-13).
[2]
[3]
[1]
TORQUE:
[1] Drive sprocket fixing plate bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
[2] Driven sprocket nut:
32 N·m (3.3 kgf·m, 24 lbf·ft)
[2]
[1]
[1]