Honda XL125LK, Owner'S Manual

Page: 157 / 243

13-4
dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Disconnect the following:
– Alternator 2P connector [1]
– Ignition pulse generator wire connector [2]
– Neutral switch wire connector [3]
– Starter motor cable [1] (by removing the rubber cap
[2] and terminal nut [3])
– Battery negative cable [4] (by removing the motor
mounting bolt [5])
Remove the rubber caps [1] from the upper engine
hanger plates.
Remove each engine hanger plate, hanger bolt and nut.
– Two upper engine hanger plate nuts [2], bolts [3]
– Upper engine hanger nut [4] and bolt [5]
– Hanger plates [6] and collar [7]
– Rear upper engine hanger nut [1] and bolt [2]
– Rear upper engine hanger plate bolts [3]
– Hanger plate [4]
– Crankcase breather hose [5]
[1]/[2]/[3]
[2]
[1]/[3]
[4] [5]
[1]
[7]
[2]/[3]
[4]/[5]
[6]
[5]
[3]
[1]/[2]
[4]