Honda XL125LK, Owner'S Manual

Page: 110 / 243

8-17
dummyhead dummyhead
CYLINDER HEAD/VALVES
CAM CHAIN TENSIONER LIFTER
REMOVAL/INSTALLATION
Remove the sealing plug [1] and O-ring [2] from the
cam chain tensioner lifter.
Turn the cam chain tensioner lifter shaft [1] clockwise
fully and secure it using the special tool.
Remove the two mounting bolts [3].
Remove the cam chain tensioner lifter [1] and gasket [2]
from the cylinder.
Remove the tensioner stopper from the tensioner lifter.
Check the cam chain tensioner lifter operation:
– The tensioner lifter shaft should not go into the body
when it is pushed.
– When it is turned clockwise with a screwdriver, the
tensioner lifter shaft should be pulled into the body.
The shaft should spring out of the body as soon as
the screwdriver is released.
Turn the cam chain tensioner lifter shaft clockwise fully
and secure it using the special tool.
[1]
[2]
TOOL:
[2] Tensioner stopper
070MG-0010100
[1]
[2]
[3]
[1]
[2]
TOOL:
[1] Tensioner stopper
070MG-0010100
[1]