Honda XL125LK, Owner'S Manual

Page: 135 / 243

11-4
dummyhead dummyhead
ALTERNATOR/STARTER CLUTCH
STATOR/IGNITION PULSE GENERATOR
REMOVAL
Remove the left crankcase cover (page 11-3).
Remove the following from the left crankcase cover:
– Socket bolt [1] and wire guide [2]
– Socket bolts [3] and ignition pulse generator [4]
– Socket bolts [5] and alternator stator assembly [6]
– Grommet [7]
INSTALLATION
Install the alternator stator assembly onto the left
crankcase cover.
Install the three socket bolts and tighten them to the
specified torque.
Apply liquid sealant to the wire grommet seating
surface and install it into the cover groove.
Apply locking agent to the threads of the ignition pulse
generator bolt and wire guide bolt.
Install the wire guide and ignition pulse generator onto
the cover.
Install the bolts and tighten them to the specified torque.
Install the left crankcase cover (page 11-3).
FLYWHEEL/STARTER CLUTCH
REMOVAL
Remove the left crankcase cover (page 11-3).
Remove the starter reduction gear shaft [1], collar [2]
and reduction gear [3].
Hold the flywheel with the special tool and loosen the
flywheel nut [1].
Remove the flywheel nut and washer [3].
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
[5]
[4]
[3] [2]
[1]
[6]
[7]
[1]
[2] [3]
TOOL:
[2] Flywheel holder
07725-0040001
[1]/[3]
[2]