Honda XL125LK, Owner'S Manual

Page: 13 / 243

1-8
dummyhead dummyhead
GENERAL INFORMATION
FRONT WHEEL/BRAKE/SUSPENSION/STEERING SPECIFICATIONS (XL125LK)
Unit: mm (in)
REAR WHEEL/BRAKE/SUSPENSION SPECIFICATIONS
Unit: mm (in
HYDRAULIC BRAKE SPECIFICATIONS (XR125LK/LEK)
Unit: mm (in)
ITEM STANDARD SERVICE LIMIT
Minimum tire thread depth – 3.0 (0.12)
Cold tire pressure Driver only 150 kPa (1.50 kgf/cm
2
, 22 psi) –
Driver and passenger 150 kPa (1.50 kgf/cm
2
, 22 psi) –
Axle runout – 0.20 (0.008)
Wheel rim runout Radial – 2.0 (0.08)
Axial – 2.0 (0.08)
Fork Spring free length 605.5 (23.84) 593.4 (23.36)
Pipe runout – 0.20 (0.008)
Recommended fluid Honda ULTRA CUSHION OIL 10W or
equivalent –
Fluid level 194 (7.6) –
Fluid capacity 180 ± 2.5 cm
3
(6.1 ± 0.08 US oz, 6.3 ±
0.09 lmp oz)
–
Brake Drum I.D. 130 (5.1) 131 (5.2)
Brake lever free play 10 – 20 (0.4 – 0.8) –
Steering head bearing pre-load 11.8 – 17.7 N (1.2 – 1.8 kgf, 2.6 – 4.0 lbf) –
ITEM STANDARD SERVICE LIMIT
Minimum tire thread depth – 3.0 (0.12)
Cold tire
pressure XR125LK/
LEK Driver only 150 kPa (1.50 kgf/cm
2
, 22 psi) –
Driver and passenger 200 kPa (2.00 kgf/cm
2
, 29 psi) –
XL125LK Driver only 150 kPa (1.50 kgf/cm
2
, 22 psi) –
Driver and passenger 225 kPa (2.25 kgf/cm
2
, 33 psi) –
Axle runout – 0.20 (0.008)
Wheel rim runout Radial – 2.0 (0.08)
Axial – 2.0 (0.08)
Drive chain Size/link 428/130 –
Slack 20 – 30 (0.8 – 1.2) –
Brake Drum I.D. 110 (4.3) 111 (4.4)
Brake pedal free play 15 – 25 (0.6 – 1.0) –
ITEM STANDARD SERVICE LIMIT
Specified brake fluid DOT 3 or DOT 4 –
Brake pad wear indicator – To groove
Brake disc thickness 4.0 (0.16) 3.5 (0.14)
Brake disc runout – 0.25 (0.010)
Master cylinder I.D. 12.700 – 12.743 (0.5000 – 0.5017) 12.755 (0.5022)
Master piston O.D. 12.657 – 12.684 (0.4983 – 0.4994) 12.645 (0.4978)
Caliper cylinder I.D. 27.000 – 27.050 (1.0630 – 1.0650) 27.060 (1.0654)
Caliper piston O.D. 26.918 – 26.968 (1.0598 – 1.0617) 26.91 (1.059)