14-26
dummyhead
dummyhead
FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Apply urea based multi-purpose grease (page 1-15) to
lip of a new upper dust seal [1] and install it.
Install the steering stem adjusting nut [2].
Tighten the steering stem adjusting nut to the specified
torque.
Turn the steering stem right and left to the end at least
five times to seat the bearings.
Loosen the steering stem adjusting nut completely.
Retighten the adjusting nut to the specified torque.
Install the top bridge [1].
Temporarily install the front fork (page 14-20).
Install the steering stem nut [2] and washer [3].
Tighten the steering stem nut to the specified torque
with a special tool.
TOOL:
[3] Steering stem socket wrench 07916-KA50100
TORQUE: 5.0 N·m (0.5 kgf·m, 3.7 lbf·ft)
[1]
[2]
[3]
TOOL:
[1] Steering stem socket wrench 07916-KA50100
TORQUE: 5.0 N·m (0.5 kgf·m, 3.7 lbf·ft)
[1]
TORQUE: 103 N·m (10.5 kgf·m, 76 lbf·ft)
[1]
[2]/[3]
Summary of Contents for XL125LK
