Honda XL125LK, Owner'S Manual

Page: 198 / 243

15-11
dummyhead dummyhead
REAR WHEEL/BRAKE/SUSPENSION
SHOCK ABSORBER
REMOVAL
Support the motorcycle securely with a hoist or an
equivalent.
Remove the following:
– Seat (page 2-2)
– Left side cover (page 2-2)
– Rear wheel (page 15-4)
Remove the shock absorber lower mounting bolt [1]
and nut [2].
Remove the shock absorber upper mounting bolt [3]
and shock absorber [4].
Visually inspect the shock absorber for damage.
Check the following:
– Damper rod for bending or damage
– Damper unit for deformation or oil leaks
– Upper mount bush for wear or damage
• Do not disassemble the shock absorber.
• Replace the shock absorber if any component is
damaged.
Installation is in the reverse order of removal.
NEEDLE BEARING REPLACEMENT
Remove the collar [1] from the shock absorber.
Remove the dust seals [2].
Press the needle bearing [1] out using the special tools
and a hydraulic press.
Replace the shock
absorber upper
mounting bolt with
new one.
TORQUE:
Upper mounting bolt:
44 N·m (4.5 kgf·m, 33 lbf·ft)
Lower mounting nut:
44 N·m (4.5 kgf·m, 33 lbf·ft)
[1]/[2]
[3]
[4]
[1] [2]
TOOLS:
[2] Driver shaft
07949-3710001
[3] Attachment, 22 x 24 mm 07746-0010800
[4] Pilot, 17 mm 07746-0040400
[1]
[2]
[3]
[4]