10-9
dummyhead
dummyhead
CLUTCH/GEARSHIFT LINKAGE
Install the tabs of
clutch disc A (out
side) into the
shallow slots [3] in
the clutch outer.
Install the clutch center assembly [1] into the clutch
outer [2].
Apply engine oil to the threads and seating surface of
the clutch center lock nut [1].
Install the lock nut onto the mainshaft.
Attach the clutch center holder to the pressure plate
using four clutch lifter plate bolts to hold the clutch
center, and then tighten the lock nut.
Install the clutch springs [1], lifter plate [2] and bolts [3].
Tighten the bolts in a crisscross pattern in several
steps.
Install the oil filter rotor [1] and washer [2] onto the
crankshaft.
[1]
[2]
[3]
TOOL:
[2] Clutch center holder
07GMB-KT70101
TORQUE: 74 N·m (7.5 kgf·m, 55 lbf·ft)
[1]
[2]
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
[1]/[3]
[2]
[1]
[2]
Summary of Contents for XL125LK
