Junior < Small >
The Bike Shield Assembly Instruction
- Frame Tube List -
- Bolts List -
Website: www.thebikeshield.com
Email: [email protected]
A Bolt Set
B Bolt Set
C Bolt Set
D Bolt Set
C Tube
: Square 15x15mm
1 Hole
B Tube
: Square 15x15mm
2 Holes on different sides
I Tube
: Square 15x15mm
2 Holes on same sides
L Tube
: Square 15x15mm
AP Tube
: Square 15x15mm
AO Tube
: Square 25x25mm
Tube Binding Bar
A Tube
: Square 25x25mm
Cross Plate
8 pcs
2 pcs
2 pcs
2 pcs
6 pcs
1 pcs
2 pcs
(Left, Right)
2 pcs
1 pcs
Bolt Length
Length : 35mm Plastic Washer
Loose Proof Nut
10 sets
Length : 40mm
Loose Prof Nut
6 sets
Length : 40mm
Plastic Washer
Nut Steel Washer Loose Prof Nut
2 sets
4 ea Rubber Leg
4 ea Screw
2 sets
1 - 4 (English)
Length : 50mm
Loose Prof Nut
2 ea Rubber Bolt Cap (STEP 4 - 3 , 6 )
* During the assembly, please be careful of the sharp area like the edge of Cross Plate. Screwdriver and 10 mm
(13/32 inch) spanner tools required to assemble The Bike Shield.
► The Bike Shield assembly video
at http://thebikeshield.com/assemblyinstruction.php
You have just purchased the most advanced and practical motorcycle storage solution on the market. Please check
“Frame Tube List” and “Bolts List” before you start assembling. Follow assembly instruction from “STEP 1” to “STEP 7”
in order.
The Bike Shield carries one year warranty against manufacturing defects in materials and workmanship. The Bike Shield
is supposed to be fixed on the ground using the cross plate and anchor bolts so that it prevents The Bike Shield from
falling down in high winds. It is also recommended to place The Bike Shield against the wall. Under customer’s
responsibility, The Bike Shield has to be secured to prevent any accident caused by strong wind, heavy snow or other
natural disasters. Warranty does not cover defects or damages caused by accidents, alteration, improper installation, fire,
earthquake, flood, lightning, storm, and other natural disasters.
The Bike Shield has to be secured to the ground.
