13-6
dummyhead
dummyhead
ENGINE REMOVAL/INSTALLATION
Hang the tab of each rubber caps [1] onto the hanger
plate [2] and install them over the upper engine hanger
plate bolts [3].
Install the drive chain onto the drive sprocket [1].
Install the drive sprocket onto the countershaft.
Install the fixing plate [2] to the countershaft while
aligning their teeth.
Rotate the fixing plate and align the bolt holes.
Install and tighten the drive sprocket fixing plate bolts
[3] alternately to the specified torque.
Install the gearshift pedal [1] on its original position as
marked during removal.
Install and tighten the pinch bolt [2] to the specified
torque.
Install the removed parts in the reverse order of
removal.
Fill the crankcase with recommended engine oil (page
3-7).
Check the following:
– Clutch lever freeplay (page 3-15)
– Drive chain slack (page 3-10)
– Brake pedal freeplay (page 3-14)
[1]
[3]
[2]
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
[3]
[2]
[1]
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
[2]
[1]
Summary of Contents for XL125LK
