15-7
dummyhead
dummyhead
REAR WHEEL/BRAKE/SUSPENSION
Apply grease to the rear axle [1].
Insert the rear axle through the left drive chain adjuster,
left side collar, rear wheel, brake panel and right chain
adjuster.
Install the drive chain [2] onto the driven sprocket.
Install the axle plate [1] and axle nut [2], then tighten the
nut to the specified torque.
Install the spring [3] onto the brake rod.
Connect the brake rod [4] to the brake arm [5] with the
joint pin [6] and adjusting nut [7].
Adjust the drive chain slack (page 3-9).
Adjust the brake pedal free play (page 3-14).
REAR DRUM BRAKE
DISASSEMBLY
Remove the rear wheel (page 15-4).
Disassemble the brake panel as following illustration.
[2]
[1]
TORQUE: 93 N·m (9.5 kgf·m, 69 lbf·ft)
[1]
[2]
[7]
[4]
[5]
[6]
[3]
– Brake shoes [1]
– Shoe springs [2]
– Brake arm cover [3]
– Nut [4]
– Brake arm bolt [5]
– Brake arm [6]
– Indicator plate [7]
– Brake cam [8]
– Lock washer [9]
– Dust seals [10]
– Brake panel [11]
[11]
[9]
[8]
[7]
[6]
[10]
[5]
[4]
[3]
[2]
[1]
10 N·m (1.0 kgf·m, 7 lbf·ft)
Summary of Contents for XL125LK
