14-24
dummyhead
dummyhead
FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Install the stem nut [1] onto the stem to prevent the
threads from being damaged when removing the lower
bearing inner race from the stem.
Remove the lower bearing inner race [2] with a chisel or
an equivalent tool without damaging the stem.
Remove the dust seal [3].
Apply grease to lip of a new dust seal [1].
Install the dust seal.
Install the new lower bearing inner race [2] with the
following tool and a hydraulic press.
Drive the new upper bearing outer race [1] into the head
pipe with the following tools.
Drive the new lower bearing outer race [1] into the head
pipe with the following tools.
[2]/[3]
[1]
Do not damage the
steering stem
during installation.
TOOL:
[3] Steering stem driver
07946-4300101
[1]
[2]
[3]
TOOLS:
[2] Driver
07749-0010000
[3] Attachment, 42 x 47 mm
07746-0010300
[1]
[2]
[3]
TOOLS:
[2] Driver
07749-0010000
[3] Attachment, 42 x 47 mm
07746-0010300
[1]
[2]
[3]
Summary of Contents for XL125LK
