3-12
dummyhead
dummyhead
MAINTENANCE
BRAKE FLUID (XR125LK/LEK)
• Spilled fluid can damage painted, plastic or rubber
parts. Place a rag over these parts whenever the
system is serviced.
• Do not mix different types of fluid, as they are not
compatible with each other.
• Do not allow foreign material to enter the system
when filling the reservoir.
Turn the handlebar so the reservoir is level and check
the front brake fluid reservoir level through the sight
glass [1].
• When the fluid level is low (below the "LOWER" level
line [2]), check the brake pads for wear (page 3-12).
A low fluid level may be due to worn brake pads. If
the brake pads are worn, the caliper pistons are
pushed out, and this causes a low reservoir level. If
the brake pads are not worn and the fluid level is
low, check entire system for leaks (page 3-13).
BRAKE SHOES/PADS WEAR
FRONT BRAKE SHOES (XL125LK)
Check the wear indicator position when the brake lever
is applied.
If the arrow [1] on the indicator plate aligns with the " "
mark [2] on the brake panel, inspect the brake drum.
Replace the brake shoes if the drum I.D. is within the
service limit (page 1-8).
FRONT BRAKE PADS (XR125LK/LEK)
Check the brake pads for wear.
Replace the brake pads [1] if wear limit groove [2] of
either pad is worn out (page 16-6).
[1]
[2]
[1]
[2]
[1]
[2]
Summary of Contents for XL125LK
