Honda XL125LK, Owner'S Manual

Page: 211 / 243

16-8
dummyhead dummyhead
HYDRAULIC BRAKE (XR125LK/LEK)
DISASSEMBLY/ASSEMBLY
Disassemble and assemble the master cylinder as following illustration.
• Keep the piston, cups, spring, snap ring, washer and boot as a set; do not substitute individual parts.
• When i.nstalling the piston, do not allow lips of the cups to turn inside out.
• Be sure that the snap ring is firmly seated in the groove.
Remove and install the snap ring [1] using the special
tool.
- Nut [1] - Brake lever pivot bolt [2] - Brake lever [3]
- Screw [4] - Brake light switch [5] - Boot [6]
- Snap ring [7] - Master piston [8] - Spring [9]
- Piston cups [10] - Reservoir cap [11] - Set plate [12]
- Diaphragm [13] - Screws [14]
[14]
[13]
[11]
[12]
[10]
[9]
[8]
[7]
[6]
[5]
[4]
[3]
[2]
[1]
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
1.2 N·m (0.1 kgf·m, 0.9 lbf·ft)
5.9 N·m (0.6 kgf·m,
4.4 lbf·ft)
1.5 N·m (0.2 kgf·m,
1.1 lbf·ft)
TOOL:
[2] Snap ring pliers
07914-SA50001
[1]
[2]