3-14
dummyhead
dummyhead
MAINTENANCE
BRAKE PEDAL FREEPLAY
Perform the free
play adjustment
after adjusting
pedal height.
Check the brake pedal free play.
Adjust the freeplay by turning the adjusting nut [1].
Make sure the cutout of the rear brake adjusting nut is
seated on the joint pin [2].
BRAKE PEDAL HEIGHT
Adjust the brake pedal to the desired height.
Loosen the lock nut [1] and turn the adjusting bolt [2] to
obtain the pedal height. After adjustment tighten the
lock nut.
Adjust the pedal free play (page 3-14).
BRAKE LIGHT SWITCH
• Adjust the rear brake light switch after adjusting the
brake pedal free play.
• The front brake light switch does not adjusting.
Adjust the rear brake light switch [1] so that the brake
light will come on when the brake pedal is pushed down
15 mm (0.6 in), and the brake engagement begins.
Hold the switch body and turn the adjusting nut [2]. Do
not turn the switch body.
FREEPLAY: 15 – 25 mm (0.6 – 1.0 in)
15 – 25 mm
(0.6 – 1.0 in)
[1]
[2]
[1]
[2]
[1]
[2]
Summary of Contents for XL125LK
