Honda XL125LK, Owner'S Manual

Page: 97 / 243

8-4
dummyhead dummyhead
CYLINDER HEAD/VALVES
CYLINDER HEAD COVER
REMOVAL/INSTALLATION
Remove the following (XR125LK/LEK only):
– PAIR control valve (page 6-14)
– Air suction pipe (page 6-15)
Remove the side shrouds (page 2-4).
Remove the cylinder head cover special bolts [1],
mounting rubbers [2] and cylinder head cover [3].
Remove the gasket [1] from the cylinder head cover [2].
Remove the O-ring [3].
Remove the dowel pin [1] and O-ring [2] from the
camshaft holder.
Clean the oil passage and air passage of the cylinder
head cover using compressed air.
Install the dowel pin into the camshaft holder.
Coat a new O-ring with engine oil and install it onto the
dowel pin.
Install a new gasket [1] into the cylinder head cover
groove.
Coat a new O-ring [2] with engine oil and install it onto
the dowel pin.
[1]/[2]
[3]
XR125LK/LEK:
[1] [3]
[2]
[1]
[2]
XR125LK/LEK:
[1]
[2]