Honda XL125LK, Owner'S Manual

Page: 197 / 243

15-10
dummyhead dummyhead
REAR WHEEL/BRAKE/SUSPENSION
– Cotter pin [1]
– Pivot pin [2] (to separate the brake rod and pedal)
INSTALLATION
Install the brake pedal in the reverse order of removal.
Apply grease to new dust seal lips.
Install the dust seals [1] with the lip facing the swingarm
side (same direction).
Apply grease to the groove in the pedal pivot and install
the brake pedal.
[1] [2]
– Brake adjusting nut [1] – Brake rod [2] – Spring [3]
– Joint pin [4] – Brake pedal return spring [5] – Brake light switch spring [6]
– Cotter pin [7] – Washer [8] – Brake pedal [9]
– Dust seals [10] – Cotter pin [11] – Pivot pin [12]
– Brake arm cover [13]
[13]
[10]
[11]
[12] [9]
[8]
[7]
[6]
[5]
[4]
[3]
[2]
[1]
[1]