HLP-C100 Series Operating Manual
HLP-C100 Series
-
34
-
C00.40 Function Description
Range
Unit
Default Setting
HAND Key on LCP
0~1
1
Option: [0] Disabled: Hand key has no f unction;
[1] Enabled: Hand key is f unctional;
Description of the choice: The f requency converter can operate in the
following three mode: HAND
、
OFF and AUTO. When running in
Hand mode, the f requency converter is locally operated and does not
allow any remote control. By activating hand a start signal is given.
C00.41
Function Description
Range
Unit
Default Setting
OFF Key on LCP
0~2
1
Option: [0] Disabled, OFF key has no f unction;
[1] Enabled, OFF key stop signal and reset of any fault;
[2] Enabled reset only, reset only (fault), stop (off ) f unction is disabled;
Description of the choice: When OFF key is chosen, the f requency converter
stops with a normal stop ramp; it can only be started by pressing either
hand or auto key on the LCP.
C00.42 Function Description
Range
Unit
Default Setting
AUTO Key on LCP
0~1
1
Option: [0] Disabled, Auto-on key has no f unction;
[1] Enabled, Auto-on key is f unctional;
Description of the choice: In auto-mode, the f requency can be remote
controlled (bus/digital).
C00.4* LCP Keypad
C00.60 Function Description
Range
Unit
Default Setting
Menu Password
0~1
Option: [0] Disabled;
[1] Enabled, none of parameter can be changed except this;
Function: This feature used to prevent non-commissioning person to change
the parameter settings.
Attention: Main Menu Password f unction is only valid to LCP, not active to
local bus.
C00.6* Protection
