HLP-C100 Series
HLP-C100 Series Operating Manual
-
1
-
Caution
●
Check to be sure that the voltage of the main circuit AC power
supply matches the input voltage of the inverter.
●
Install the inverter in a safe location, avoiding high temperature,
direct sunlight, humid air or water.
●
The inverter can only be used at the places accredited by our
company. Any unauthorized working environment may have the
risks of
fi
re, gas explosion, electric shock and other incidents.
●
If more than one drive installed on the same control cabinet, make
additional cooling fan, so that the inside temperature is lower than
40
℃
in order to prevent overheating or
fi
re occurs.
●
It will affect the service life of the inverter if a contactor is
installed on the input side to control the start and stop. Generally
it is required to control it through terminal commands. Special
attention should be paid to its use in the case of the start and stop
more frequently places.
●
Do not install any switch component like circuit breaker or
contactor at the output of the inverter. If any of such components
must be installed due process and other needs, it must be ensured
that the inverter has no output when the switch acts. In addition,
it is forbidden to install any capacitor for improvement of power
factor or any varistor against thunder at the output. Otherwise
it will cause malfunctions, tripping protection and damages of
components of the inverter.
●
Please use an independent power supply for the inverter. Do avoid
using the common power supply with an electrical welder and
other equipment with strong disturbance. Otherwise it will cause
the drive to protect or even damage the drive.
●
Do not make any high voltage test with any component inside the
inverter. These semi-conductor parts are subject to the damage of
Chapter 1 Safety Precautions
1.1 Before power-up
Caution
Indicates misuse may damage the inverter or
mechanical system .
Danger
Misuse may result in casualty.
