HLP-C100 Series
HLP-C100 Series Operating Manual
-
3
-
Danger
●
Never connect or disconnect the motor set while the inverter is in
running. Otherwise it will cause over-current trip and even burn
up the main circuit of the inverter.
●
Never remove the front cover of the inverter while the inverter is
powered up to avoid any injury of electric shock.
●
Do not come close to the machine when the Reset Function is
used to avoid anything unexpected. The motor may automatically
recover from fault.
Caution
●
Do not measure the signals on circuit boards while the inverter is
running to avoid danger.
●
The drive has been optimized before sold. Please make proper
adjustments according to the desired functions.
●
Do consider the vibration, noise and the speed limit of the motor
bearings and the mechanical devices.
1.3 During the operation
Caution
●
Even in the case of the main power, the other voltage inputs and
the share load (linkage of DC intermediate circuit) all have been
disconnected from the mains; the internal of the drive may still
have residual energy. Before touching any potentially live parts
of the inverter, please wait at least 4 minutes. Otherwise, it may
expose you to a risk of electrical shock.
1.4 After the power-off
