HLP-C100 Series Operating Manual
HLP-C100 Series
-
50
-
C03.94
Function Description
Range
Unit Default Setting
Ramp8 Ramp up Time
0.10~300.00
S
*
Function: Enter acceleration time f rom 0Hz to rated Motor speed in C01.25.
Attention: Choose a ramp-up time such that the output current does not exceed
the current limit set in C04.18.
C03.90 Function Description
Range
Unit
Default Setting
Ramp7 Type
0~2
0
Option: [0] Linear: Motor ramp up to the preset f requency with a constant
acceleration;
[2] S-ramp: Motor ramp to the preset f requency with non-linear
acceleration.
C03.91
Function Description
Range
Unit
Default Setting
Ramp7 Ramp up Time 0.10~300.00
S
*
Function: Enter acceleration time f rom 0Hz to rated Motor speed in C01.25.
Attention: Choose a ramp-up time such that the output current does not exceed
the current limit set in C04.18.
C03.92
Function Description
Range
Unit Default Setting
Ramp7 Ramp Down Time 0.10~300.00
S
*
Function: Enter the deceleration time f rom the rated motor speed in C01.25 to
0Hz.
Attention: Choose a ramp-down time such that no over-voltage arises in the
inverter due to regenerative operation of motor and such that the
generated current does not exceed the current limit set in C04.18.
selected digital input or serial communication port. See C05.1, choose [14].
C03.93
Function Description
Range
Unit Default Setting
Ramp8 Type
0~2
0
Option: [0] Linear: Motor ramp up to the preset f requency with a constant
acceleration;
[2] S-ramp: Motor ramp to the preset f requency with non-linear
acceleration.
