HLP-C100 Series
HLP-C100 Series Operating Manual
-
45
-
Option: [0] Linear: Motor ramp up to the preset f requency with constant
acceleration.
[2] S ramp: Motor ramp to the preset f requency with non-linear
acceleration.
Description of Choice: If Linear [1] is selected, the f requency may exceed the
preset setting during the acceleration; If S ramp [2] is selected, due
to smoother S curve, it will automatically adjust acceleration when
approaching to the preset f requency to avoid exceeding it.
Attention: It is possible to switch acceleration and deceleration via digital
input terminals, see parameterC05.1* choice. The state of the digital
input terminal is shown in binary code; If the drive detects the
corresponding digital input terminals connected, then the bit is”1”, on
the contrary is”0”. The corresponding relationship between state of the
digital input terminals
、
binary code and the selected ramp type are as
follows:
Ramp type and Ramp time
Binary system
bit2
bit1
bit0
Ramp Group
Terminal State
0
0
0
1
0
0
1
2
0
1
0
3
0
1
1
4
1
0
0
5
1
0
1
6
1
1
0
7
1
1
1
8
