HLP-C100 Series Operating Manual
HLP-C100 Series
-
2
-
Danger
●
Be sure to turn off the power supply before wiring.
●
Mount the drive in the metal and other non-combustible materials
to avoid the risk of
fi
re.
●
Don’t install the drive in a space with explosive gas, otherwise,
they lead to explosion.
●
R, S, T terminals are power input terminals, never mixed with
U.V.W terminals. Be sure that the wiring of the main circuit is
correct. Otherwise it will cause damages of the inverter when the
power is applied to it.
●
The terminal of
must be grounded separately and never
connected to N-line. Otherwise it will easily cause the protection
or errors of the inverter.
●
Do not dissemble or modify any internal connecting cord, wiring
or component of the inverter by yourself.
●
Never remodel it or exchange control boards and components by
yourself. It may expose you to an electrical shock or explosion,
etc.
●
Keep the inverter from the reach of children or persons not
concerned.
Danger
●
Do not plug the connectors of the inverter during the power up
to avoid any surge into the main control board due to plugging,
which might cause the damage of the inverter.
1.2 During the power-up
high voltage.
●
The IC board of the inverter are susceptible to the effect and
damage of static electricity. Don’t touch the main circuit board.
●
Installation, commissioning and maintenance must be performed
by quali
fi
ed professional personnel.
●
It should be handled with the base to avoid the dropping of the
inverter, which may possibly cause the injuries to people and the
damages to the inverter.
