Holip HLP-C100 Series, Operating Manual

Page: 74 / 92

HLP-C100 Series
HLP-C100 Series Operating Manual -
69
-
C16.6*
、
C16.7* Inputs and Outputs
Function: View signal states f rom active digital inputs, which indicates in a 16-
bit binary code. If the drive detects digital input terminals connected,
the corresponding position is set to “1”, otherwise “0”. Digital input
terminal and the corresponding relationship between the binary code
are as below:
C16.60 Function Description Range Unit Default Setting
Digital Input 0~65535
Function: View actual input voltage or current value on analog input VI.
C16.62 Function Description Range Unit Default Setting
Analog Input VI 0.00~20.00 V/mA
Function: View the output status of the relay, the corresponding bit is set to
“1”when the relay output is active, otherwise it will be set to “0”.
C16.71 Function Description Range Unit Default Setting
Relay Output 0~65535
Binary Term. No. Binary Term. No. Binary Term. No. Binary Term. No.
bit0 FOR bit4 DI3 bit8 Reserved bit12 Reserved
bit1 REV bit5 Reserved bit9 Reserved bit13 Reserved
bit2 DI1 bit6 Reserved bit10 Reserved bit14 Reserved
bit3 DI2 bit7 Reserved bit11 Reserved bit15 Reserved
Binary bit0
Item. No. Relay 1
C16.8* Field bus/FC Port
Function: View the last received reference f rom the FC port.
C16.86 Function Description Range Unit Default Setting
FC Port Reference -32768~32767
C16.9* Diagnosis Readouts
Function: View the alarm word sent via the serial communication port in hex
C16.90 Function Description Range Unit Default Setting
Alarm Word 0~0xFFFFFFFFUL