GRAPHTEC FC5100A-100, User Manual

Page: 93 / 201

Advanced Functions and Settings: AUTO REG. MARK - Auto Registration Mark Sensor
93
Note: For instructions on how to change the registration mark pattern, see Setting
the Type of Registration Mark for more details.
Caution: The size of the registration mark is important; the plotter may not sense a mark
that is the wrong width or length. Correct line width is between 0.3mm and
1.0mm. Correct line length is between 5mm and 20mm. See
Size Of Regis-
tration Mark for more details.
T
HE
R
EGISTRATION
M
ARK
L
OCATION
The location of the registration mark is important. The registration mark must
be at least 20mm from the leading edge of the media, 15mm from the left or right
edge of media, and 32mm from the back edge of the media. The plotter cannot
scan a registration mark that resides along the edge of the media. The following
illustrates the location of the registration marks:
Mark 3
Mark 2 Mark 4
Mark 1
Media feed
direction
Mark 1
Mark 2 Mark 4
Mark 3
Pattern 2 Pattern 1
Mark 2 Mark 4
32mm
15mm
20mm
15mm
Mark 3 Mark 1
Mark 3
Pattern 1
32mm
20mm
15mm
15mm
Media feed
direction
Mark 1
Mark 2 Mark 4
Pattern 2
(1.26")
(0.59")
(0.59")
(0.79") (0.79")
(0.59")
(0.59")
(1.26")